TECHNICAL DATA

Model No: HS700

Power Supply: 100-250V/AC 50~60Hz

Wattage: 70W（With overheat protection）

Material: PA+GF Weight: 600g

MEGA STAPLER Intelligent Adjustable Hot Stapler

1. Built-in microprocessor.

2. With high-brightness LED lighting.

3. Staples are pre-cut, and the exposed parts can be     easily broken after the plastic parts are melted and implanted, no need cutting pliers.

4. With reinforced storage box.

5. The heating time is extremely short, the fastest speed is in 3 seconds.

6. Good for weld repairing various plastic parts.

7. The staples can be implanted and welded in two directions.

8. The gun body is extremely light weight and easy to operate.

9. Three different heating modes.

10. With six different staples, perfect for weld repairing in various situations.

11. Compact structure.

12. With overheating protection.

Power indicator

Work indicating light

Protection indicator

Heating speed

indicating light

Light switch

Heating speed adjustment switch

Power switch

USAGE

Plug in the power

Turn on the switch to make sure the status indicator is on

Insert the copper rod in the appropriate 

Select the desired heating rate 

Align the staple with the cracks that need to be repaired 

Cut off the exposed part of the staple

Use the ironing head to heat the cracks and the protruding plastic next to it. 

 Repairing is completed

• The ideal way to repair most modern products which are made of plastic.

• Strong for shock and twist after repair.

• Stainless steel staples will not rust.

• Wavy staple design for maximum load.

• Quick and easy operation.

• No training required,Learn to use in seconds.

• Ergonomic designed to fit into the palm of your hand.

• Staples weld into the plastic quick and easily.

• Repairs at least 98% of the plastics on the market.

• Perfect for repairing:  cracked bumpers of car, Electric     carz, motorcycle   ATV and much more.

ACCESSORIES

0.6 mm Outside corner staples,for repairing outside corners.

0.8 mm Inside corner staples,for repairing inside plastic corners.

0.6 mm Flat staples, for repairing flat plastic areas.

0.8 mm Flat staples, for repairing flat plastic areas.

0.6 mm Wave staples, for repairing flat plastic areas that need extra reinforcement .

0.8 mm Wave staples, for repairing flat plastic areas that need extra reinforcement .

Use the ironing head to heat the cracks and the protruding plastic next to it.

Repairing is completed.

PACKING DETAILS 

1. Intelligent adjustable hot stapler

2. Soldering iron

3. 0.6 mm Inside corner staples *100

4. 0.6mm Outside corner staples *100

5. 0.8mm Flat staples *100

6. 0.8 mm Wave staples *100

7. 0.6mm Flat staples *100

8. 0.6 mm Wave staples *100

9. Manual